Before and after: weathered deck restored with warm stain — Elizabeth project, Richmond Hill
Decks and fences take more weather than any other part of your property. Cleaning, repairing, and staining them protects the wood from sun and rain, and makes the whole yard look cared for.
We stain decks and fences across Vaughan and the GTA, with the preparation matched to the condition of the wood.
Decks, cleaned and stained. Wood is cleaned, sanded where needed, and stained for colour and protection that stands up to sun and rain.
Fences, sealed. Sealing slows weathering and keeps the fence looking tidy for longer.
Worn wood, restored. Tired wood is cleaned, repaired, and refinished instead of replaced, where possible.
How it works
Free quote and walkthroughWe inspect the deck or fence, note any repairs, and give you a written estimate.
Preparation and protectionWood is cleaned and prepared, and nearby plants and surfaces are protected.
Painting and finishingStain is applied in even coats, for colour and lasting protection.
Final walkthrough and clean-upWe check the finish with you and leave the yard tidy.
Stain is applied in even coats for colour and lasting protection, with the preparation matched to the condition of the wood — cleaned, sanded where needed, and repaired instead of replaced where possible. Most decks need attention every few years to stay protected.
Every job includes thorough preparation, premium stain, tidy work sites, and a final walkthrough — backed by our 5-year warranty, WSIB coverage, and $5 million liability insurance.
Common Outdoor Wood Issues Addressed by Our Team
Unsealed wooden decks and fences face continuous weather exposure, creating visible damage that shortens structural lifespans over time.
Graying and Weathered Wood. UV rays break down natural wood fibers, causing rich timber tones to fade into a dull, grayed, and weathered appearance.
Water Absorption and Wood Rot. Unsealed wood absorbs rain and melting snow, causing boards to swell, warp, cup, and develop structural rot over time.
Surface Splintering and Cracking. Repeated freeze-thaw cycles force wood grain to expand and contract, leading to surface cracks and dangerous foot splinters.
Peeling Past Stain Coatings. Film-forming stains trap moisture beneath the surface, causing the finish to bubble, crack, and flake off in unsightly patches.
Loose or Splitting Boards. Repeated moisture cycles loosen fasteners and separate board joints, creating uneven surfaces and safety hazards underfoot.
Mold and Algae Buildup. Shaded, damp wood surfaces develop green algae and mildew stains, dulling the wood tone and accelerating fiber breakdown.
Signs Your Deck or Fence Requires Fresh Staining
Water pooling on wood instead of beading up
Faded, grayed, or discolored wood surface tones
Flaking, peeling, or cracking previous stain layers
Splintering wood fibers along deck floorboards
Mildew staining or green algae growth on fence posts
Cupping or twisting boards along exposed railings
Rough, weathered wood texture underfoot
Nail heads visibly protruding from shrinking boards
Deciding When to Seal Your Outdoor Wood Structures
Staining your deck or fence before moisture penetrates the grain prevents costly board replacement and keeps outdoor entertaining spaces safe. Whether you want to revitalize a weathered backyard deck or protect a newly installed privacy fence, professional wood staining delivers deep weatherproofing and elevates your outdoor property value. Our team provides clear advice on oil and water-based stain finishes to ensure your deck resists seasonal wear.
How Deck & Fence Staining Works
We look at the wood first.We check the deck and fence for loose boards, rot, and how well the old stain is holding.
The wood is cleaned.Dirt and mildew are washed away, and worn areas are sanded so the new stain can soak in.
The stain goes on.Even coats of stain are brushed or rolled on so the colour is uniform and the wood is protected from sun and rain.
Let it dry.Most stains need 24 to 48 hours to dry fully, so wait two full days before putting heavy furniture back on the deck.
Areas We Serve
We paint homes and businesses across Vaughan, Toronto, Richmond Hill, Markham, Mississauga, Brampton, Oakville, Aurora, Newmarket, Scarborough, and Etobicoke. See all service areas →
Recent Work — Before & After
Real before-and-after photos from recent jobs.
Before and after: multi-level deck, dark stain — Sagi ExteriorBefore and after: under-deck — Sagi ExteriorBefore and after: pergola restored, dark stain — Wagner
How can I tell if my deck or fence needs to be restained?
Perform a simple splash test by sprinkling water on the wood surface. If the water beads up, the sealant is still working; if it soaks in immediately, the wood is unprotected and requires fresh staining.
Is power washing necessary before staining a deck or fence?
Yes, power washing clears away embedded dirt, grayed wood fibers, and mold spores that prevent stain from soaking deep into the wood grain. Proper drying time is allowed before applying fresh stain coats.
What is the difference between semi-transparent and solid stains?
Semi-transparent stains soak into the wood to highlight natural grain patterns, while solid stains cover the wood like paint, offering maximum UV protection and hiding surface imperfections on older decks.
How long should a newly stained deck dry before walking on it?
Most outdoor wood stains require 24 to 48 hours to dry and cure fully depending on humidity and sunlight. We recommend waiting two full days before placing heavy outdoor furniture back on the deck.
Can a new pressure-treated wood fence be stained right away?
New pressure-treated wood contains high moisture levels from manufacturing and must dry out for several weeks or months before it can absorb stain properly without trapping internal moisture.
